We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Thermal spraying.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Thermal spraying(hvof) - List of Manufacturers, Suppliers, Companies and Products

Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.

Thermal spraying Product List

1～15 item / All 26 items

Displayed results
Rejuvenation Technology: JET Thermal Spraying (HVOF)

Rejuvenation Technology: JET Thermal Spraying (HVOF)

We will select the appropriate JET thermal spray powder and application method for the job!

Our company conducts 'JET Thermal Spraying (HVOF)' to prevent sulfuric acid corrosion of metals and enhance the durability of components. We select the appropriate JET thermal spray powder and application method based on the usage environment and material of the components. Additionally, the HVOF diamond jet thermal spraying process utilizes the combustion of large quantities of high-pressure combustible gas and flammable gas to perform high-speed flame spraying, allowing for the formation of coatings with excellent density and adhesion at a low cost. 【Features of the HVOF Diamond Jet Thermal Spraying Process】 ■ Utilizes the combustion of large quantities of high-pressure combustible gas and flammable gas for high-speed flame spraying ■ Flame combustion temperature reaches 2760°C ■ Flame speed can reach approximately 1400 m/sec to 2100 m/sec ■ Capable of forming coatings with excellent density and adhesion at a low cost *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Proposal for HVOF thermal spraying on resin

Proposal for HVOF thermal spraying on resin

Solving various issues such as wear, weight reduction, and peeling! We also propose ultra-hard thermal spraying for resins.

Our company is capable of integrated production from HVOF thermal spraying to grinding and super finishing. In cases where resin is used for product weight reduction, various problems can arise. In such situations, please consider our "HVOF thermal spraying." It can compensate for the weaknesses of resin. "Sliding parts are wearing out" "Having trouble with peeling from hard chrome plating" "I want to apply a high-hardness coating" "Heavy and costly due to being made of cemented carbide" These issues can be resolved with HVOF thermal spraying (WC-Co coating)! 【Features】 ■ Dense and hard coating: Improved wear resistance (porosity less than 1%) ■ Hardness higher than hard chrome plating (over Hv1100), compliant with RoHS ■ Change to a lighter base material for weight reduction and cost savings with a hard coating ■ Can add chemical resistance for items used in chemical environments ■ Spray coating available for non-metal materials as well ■ Can achieve thick coatings (over 100μm) *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Surface treatment: Wear resistance enhancement with carbide cermet-based thermal spraying.

Surface treatment: Wear resistance enhancement with carbide cermet-based thermal spraying.

The dense and high-hardness thermal spray coating is effective in wear resistance and surface pressure resistance.

■Thermal spray material: Carbide cermet-based ■Spraying method: High-velocity flame spraying (HVOF/HVAF) ■Construction examples: Various roll products ■Effects: Wear resistance, surface pressure resistance

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ultra-high-speed frame thermal spraying (HP-HVOF spraying) - cermet spraying

Ultra-high-speed frame thermal spraying (HP-HVOF spraying) - cermet spraying

What is ultra-high-speed frame thermal spraying (HP-HVOF spraying) - cermet spraying?

"Thermal spraying" is a technique that involves heating materials such as metals or ceramics, turning them into fine particles, and spraying them onto the surface of a substrate using a high-temperature, high-pressure gas flow or plasma. This process allows for the imparting of properties such as wear resistance, corrosion resistance, heat resistance, and thermal insulation to the surface of the substrate. Broadly, thermal spraying can be divided into two categories: one aimed at "high functionality" such as wear resistance, corrosion resistance, heat resistance, and rust prevention, and the other aimed at "repair and regeneration" of worn components. Thermal spraying has a wide range of applications as a surface treatment technology and contributes to improving product functionality and extending lifespan. "HP-HVOF thermal spraying" is one type of thermal spraying technology that utilizes a high-speed, high-temperature gas flow generated by mixing oxygen and fuel and combusting it under high pressure, primarily used for spraying coating materials such as cermets. Therefore, it is also referred to as cermet spraying. It is particularly used to form high-density and high-strength coatings, making it suitable for imparting properties such as wear resistance, corrosion resistance, and heat resistance. It is widely used in fields that require precise and high-performance coatings, playing a crucial role especially in components and structures used in harsh environments.

  • Other surface treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed frame thermal spraying device 'Met-PCC (HVOF)'

High-speed frame thermal spraying device 'Met-PCC (HVOF)'

Equipped with an Intel Dual Atom Processor! It excels in operability, integration, and communication.

The "Met-PCC (HVOF)" is a high-speed flame spraying device that can connect to gas-fueled HVOF guns from manufacturers other than Metarization. The interface operates on a Windows platform with a touchscreen featuring an Intel Dual Atom processor. For gas and liquid, all are controlled by mass flow rate for optimal coating continuity, allowing real-time monitoring of all spraying parameters. 【Features】 ■ Mass flow control = high repeatability ■ User-friendly intuitive operator interface ■ Inverter power supply = stability ■ Liquid fuel = thick and low-stress coatings ■ Compatible with various guns *For more details, please refer to the external link page or feel free to contact us.

  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HVOF thermal spraying (High Velocity Oxy-Fuel spraying)

HVOF thermal spraying (High Velocity Oxy-Fuel spraying)

High-speed jet frame spraying using oxygen and fuel.

◆◇◆ What is HVOF Thermal Spraying ◆◇◆ It stands for High Velocity Oxygen Fuel. It refers to thermal spraying using a high-speed jet flame created by oxygen and fuel. A mixture of high-pressure oxygen and fuel gas is burned in a combustion chamber. The combustion flame is constricted by a nozzle, and the moment it exits into the atmosphere, a rapid gas expansion occurs, resulting in a supersonic jet. The thermal spray material accelerated by high kinetic energy forms a high-density coating with minimal oxidation or compositional changes.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Velocity Oxy-Fuel (HVOF) Thermal Spray Process

High Velocity Oxy-Fuel (HVOF) Thermal Spray Process

You can obtain a coating with a dense and high adhesion! It will be finished with excellent surface roughness through mirror polishing processing.

Introducing the thermal spraying process "High Velocity Oxygen Fuel (HVOF)." Compared to conventional plasma spraying, it can form coatings with higher hardness and excellent wear resistance. The accelerated spraying material undergoes minimal oxidation or compositional changes, allowing for the formation of high-quality coatings with high density and low porosity (below 0.5%). 【Features】 ■ High hardness ■ Coatings with high adhesion strength can be obtained ■ Easier to achieve ultra-mirror finishes ■ Low porosity coatings are formed *For more details, please refer to the PDF document or feel free to contact us.

  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Velocity Oxygen Fuel (HVOF) Spraying

High Velocity Oxygen Fuel (HVOF) Spraying

Thermal spraying onto screws and thermal spraying onto the inner diameter of casings! A high-hardness wear-resistant coating can be obtained.

This is an introduction to Kōei Techno System's "High-Speed Frame Thermal Spraying (HVOF Spraying)," which focuses on the repair, regeneration, prolongation, and maintenance of parts, aiming for high quality, wear resistance, heat resistance, and corrosion prevention, similar to preventive medicine, through advanced research and development of machinery. It is a type of gas thermal spraying that uses a super high-speed jet stream generated by combustion with high-pressure oxygen. Since the material collides with the substrate at high speed, it forms a coating with very high adhesion and density, resulting in a high-quality film. It is suitable for thermal spraying of cermets such as WC-Co, yielding a high-hardness wear-resistant coating. ● Thermal spraying on screws ⇒ Photo 1 ● Thermal spraying on casing inner diameters ⇒ Photo 2 *For more details, please download the catalog or contact us.

  • Welding Machine
  • Processing Contract
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Main corrosion and wear-resistant processing

Main corrosion and wear-resistant processing

We have the technology for thermal spraying and welding as the main methods for corrosion and wear-resistant processing.

This is an introduction to Kōei Techno System's main corrosion and wear-resistant processing, which focuses on the repair, regeneration, extension of life, and maintenance of parts. We conduct research and development aimed at enhancing the quality of parts and advancing machinery with features such as wear resistance, heat resistance, and corrosion prevention, similar to preventive medicine. **Main Processing by Thermal Spraying** We perform thermal spraying of cermets such as WC-Co and WC-CrNi using HVOF (High Velocity Oxygen Fuel) spraying, as well as thermal spraying of cermets and ceramics using plasma spraying. ● Processing by thermal spraying ⇒ Photo 1 **Main Processing by Welding** We carry out hardfacing using arc, gas, and TIG welding. ● Processing by welding ⇒ Photo 2 **Typical Characteristics of Various Thermal Spraying and Welding Technologies** ● Typical characteristics of various thermal spraying and welding technologies ⇒ Photo 3 *For more details, please download the catalog or contact us.*

  • Welding Machine
  • Processing Contract
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
HVOF thermal spraying (High Velocity Oxygen Fuel spraying)

HVOF thermal spraying (High Velocity Oxygen Fuel spraying)

It is a super hard coating technology that possesses a dense film characteristic with strong adhesion to the substrate, resulting in extremely high wear resistance and corrosion resistance.

"HVOF thermal spraying (High Velocity Oxygen Fuel spraying)" is a super hard thermal spray coating adapted for wear and corrosion resistance. Due to the smooth surface of the coating, it is easy to achieve a super mirror finish, and a thick film formation is also realized. The extremely high particle velocity (500–800 m/s) produces a coating with very high density and low porosity. Additionally, because the material is fed at ultra-high speed, the time it is exposed to the flame is minimized, allowing for the reduction of oxidation and alteration to a minimum. 【Features】 ■ High density ■ High adhesion ■ Oxidation and alteration suppression ■ Surface smoothness *For more details, please refer to the PDF document or feel free to contact us.

  • Surface treatment contract service
  • Processing Contract

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Liquid and gas fuel thermal spraying system 'Met-PCC (HVOF)'

Liquid and gas fuel thermal spraying system 'Met-PCC (HVOF)'

Compact and easy to operate! Achieves high adhesion and a low porosity film.

The "Met-PCC(HVOF)" is a thermal spraying system with an easy-to-use intuitive operator interface. On the front end, the operator interface utilizes a graphical user interface (GUI), and it is possible to incorporate video onto the screen as an option. The standard equipment is controlled by mass flow rate for both gas and liquid to ensure continuity suitable for coatings, allowing real-time monitoring of all thermal spraying parameters. 【Features】 ■ Mass flow control = high repeatability ■ Easy-to-use intuitive operator interface ■ Inverter power supply = stability ■ Liquid fuel = thick and low-stress coatings ■ Compatible with various guns *For more details, please refer to the PDF document or feel free to contact us.

  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wear-resistant thermal spraying for crushing machines.

Wear-resistant thermal spraying for crushing machines.

A high-hardness coating is applied to the substrate to improve wear resistance.

【Inner Wall of Crushing Device】 WC/12Co applied, improved wear resistance ● Wear-resistant thermal spraying on the inner wall of the crushing device ⇒ Photo 1 【Feeding Screw and Conveying Screw】 WC/12Co applied, improved wear resistance ● Wear-resistant thermal spraying on the feeding screw and conveying screw ⇒ Photo 2, Photo 3 【Internal Parts of Powder Classification Device】 Ceramic and WC/12Co applied, improved wear resistance ● Wear-resistant thermal spraying on the internal parts of the powder classification device ⇒ Photo 4 【Parts of Powder Classifier】 Ceramic applied, improved corrosion and wear resistance ● Corrosion and wear-resistant thermal spraying on the parts of the powder classifier ⇒ Photo 5, Photo 6 【Pump Parts】 WC/10Co4Cr, WC/CrNi, or WC/20CrC7Ni applied ● Corrosion and wear-resistant thermal spraying on pump parts ⇒ Photo 7, Photo 8 【Other Application Examples】 WC/CrNi, WC/Hastelloy, WC/20CrC7Ni, etc. ● Corrosion and wear-resistant thermal spraying on the surface of drying devices ● Wall of crushing device HVOF thermal sprayed and processed ⇒ Photo 9 ● Screen: WC-Co HVOF thermal sprayed, stirring blade: Magcoat thermal sprayed ⇒ Photo 10

  • Processing Contract
  • Calibration and repair
  • Other contract services

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Corrosion and wear-resistant processing by HVOF thermal spraying (High Velocity Oxy-Fuel spraying)

Corrosion and wear-resistant processing by HVOF thermal spraying (High Velocity Oxy-Fuel spraying)

It is suitable for thermal spraying of cermets such as WC-Co and WC-CrNi, resulting in a high-hardness wear-resistant coating.

This is an introduction to Kōei Techno System's "Corrosion and Wear Resistant Processing by HVOF Coating (High Velocity Oxygen Fuel Coating)," which focuses on the repair, regeneration, extension of life, and maintenance of parts. We conduct research and development aimed at enhancing the quality of parts, improving wear resistance, heat resistance, and anti-corrosion, similar to preventive medicine, to advance machinery. HVOF is a type of gas thermal spraying method that utilizes a super high-speed jet stream generated by the combustion of high-pressure oxygen. Because the material collides with the substrate at high speed, it forms a coating with very high adhesion and density, resulting in a high-quality film. It is suitable for spraying cermets such as WC-Co, yielding high-hardness wear-resistant coatings. 【Screws】 ● Supply machine screw ⇒ Photo 1 ● Conveying screw ⇒ Photo 2 【Crushing Equipment】 ● Inner wall of the crushing equipment ⇒ Photo 3 ● Wall surface of the crushing equipment ⇒ Photo 4 ● Processed inner wall of the crushing equipment ⇒ Photo 5 【Pump Parts】 ● Pump parts ⇒ Photo 6, Photo 7 ● After processing pump parts ⇒ Photo 8 【Powder Classification Equipment】 ● Inner cylinder of the powder classification equipment ⇒ Photo 9 *For more details, please download the catalog or contact us.

  • Welding Machine
  • Processing Contract
  • Surface treatment contract service

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Thermal spraying

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.